VALE Welle Multishade/Duorol Blind

Inside Recess

The recess is inside the window opening. Choose this option if you want to the blind to lie in the recess of the window.

Width: Measure the inside width of the window at the top middle and bottom. Use the narrowest width measurement always using a metal tape measure.

Height: Measure the height of the window at the left, centre and right. Use the shortest height measurement always using a metal tape measure.

We will deduct the manufacturers recommended tolerance off the width/drop of the blind to ensure the blind operates perfectly within the window recess.

Outside Recess/Exact

Outside Recess/Exact is the outside of the window opening, overlapping the window recess. Choose this option if you want the blind to overlap the window recess.

Width
To minimise light leakage it's recommended that the blind overlaps the window recess on the width by least 40mm each side (60mm in the case of vertical blinds).

Height
When measuring the height take into account the required space for the mounting bracket. A flat surface of a minimum 70mm above is required (50mm in the case of vertical blinds). The overlap at the bottom of the blind is a matter of personal choice but please take into account obstacles such as radiators.

 

If you are unsure please contact us on 01949 845399

Blind Installation Heights

The 2014 changes to the child safety requirements of BS EN 13120:2009+A12014 place an obligation on all blind manufacturers to sell compliant products.

If you choose an 'Not Known Installation Height' from the drop down box your blind will be manufactured in accordance with the Safety Regulation Requirements.

If you select an installation height (this is the height the brackets will be installed above the floor level) then your blind will be manufactured taking this into account.

If you are unsure please contact us on 01949 845399

Your Vale Multishade/Duorol Blinds can be face or top fixed.

If you are unsure please contact us on 01949 845399

The Vale Multishade Blinds come with an Aluminium Cassette & Bottom Bar are available in white, silver, black, brown and cream.

The head rail with rounded face plate and the bottom rail have the following dimensions.

Cassette 73mm x 68mm & Bottom Rail 45mm

Hardware colour choice - White, Cream, Silver, Brown and Black

If you are unsure please contact us on 01949 845399

Your Vale Multishade/Duorol Blinds can be operated by means of a Loop Chain in various colours. Alternatively you can choose to have your blind battery operated. The battery operated blinds come with a single channel remote in Pure finish.

If you are ordering more than one battery operated blind you can select one blind with the Five Channel remote control, which will operate more than one blind, and the other blind/s with Battery Operated - No remote control. 

Please bear in mind side gaps between the fabric edge and the cassette edge.

The gap on the control side will be approximately 16mm and on the opposite side approximately 7mm.

If you are unsure please contact us on 01949 845399

 

When installing several blinds next to each other, the Horizontal panels will set as close together as possible to try and provide a continuous line, providing the positioning heights of the cassettes are the same. A 100% match of the fabric stripes where systems are installed side by side cannot be Guaranteed on account of the dimensional tolerances in the woven stripes.