Vale Blinds

01949 845399

0Items:

£0.00Total:

Starwood 50mm Wooden Venetian Blind

Place your mouse over this image

On offer

34%OFF

  • 1 Year Guarantee
  • Info
  • Installation Instructions (1)
  • Delivery

Standard Specification:

  • 50mm slats are 2.5 mm thick Basswood
  • All parts are colour co-ordinated
  • Headrail, bottom bar buttons and cord condensor are colour co-ordinated PVC
  • Slats, valance, bottom bar and tassels are all colour co-ordinated to the wood colour
  • Cords and ladder braids are colour co-ordinated to the wood colour
  • Headrail is approximately 59mm wide x 42mm high
  • Box end brackets with centre support where needed - brackets 56mm deep x 47mm high
  • Break away cord condenser & 2 piece cleat in accordance with the Child Safety Legislation
  • No screws are supplied with this blind

Alternative Specification:

  • Option of colour matched mitred valance returns
  • Stained slat ends
  • Decorative tapes

NOTE: Alignment of slats across multiple blinds not available. End of slats not stained

Delivery

For full details of our delivery times please
click here

Beat a Price

Starwood 50mm Wooden Venetian Blind

Starwood-Soho

Order Code
8326
£47.81
£31.56

Decora Starwood high quality made-to-measure Wood Venetian Blind at a budget’ price. The Starwood range is manufactured from kiln dried Basswood and is available a selection of finishes from natural wood shades to painted finishes with a solid timer colour matched Pelmet, Base Rail, Cords and Ladder Braids.

Decora Starwood Venetian Blinds come with a choice co-ordinating tapes, so there is a combination to suit any room at an exceptionally low price.

All Starwood wooden venetian blinds are manufactured in accordance with the child safety legislation.

The number of ladder cords or tapes varies according to the blind size

Price in GBP
£47.81
£31.56
    • *
    • *
    • sa_btn_ten_10158080
    Click for help
    Click for Help
    Click for Help
    Click for Help
    Click for Help

    Inside Recess

    recess_fit.jpg

    The recess is inside the window opening. Choose this option if you want to the blind to lie in the recess of the window.

    Width: Measure the inside width of the window at the top middle and bottom. Use the narrowest width measurement always using a metal tape measure.

    Height: Measure the height of the window at the left, centre and right. Use the shortest height measurement always using a metal tape measure.

    We will deduct the manufacturers recommended tolerance off the width/drop of the blind to ensure the blind operates perfectly within the window recess.

     

    Outside Recess/Exact

    exact_fit.jpg

    Outside Recess/Exact is the outside of the window opening, overlapping the window recess. Choose this option if you want the blind to overlap the window recess.

    Width
    To minimise light leakage it's recommended that the blind overlaps the window recess on the width by least 40mm each side (60mm in the case of vertical blinds).

    Height
    When measuring the height take into account the required space for the mounting bracket. A flat surface of a minimum 70mm above is required (50mm in the case of vertical blinds). The overlap at the bottom of the blind is a matter of personal choice but please take into account obstacles such as radiators.

     

    If you are unsure please contact us on 01949 845399

    Starwood Controls

    These blinds come with a Tilt Cord Control to enable you to adjust the angle of the slats and a Raise/Lower Cord Control to enable you to lift and lower the blind completely.

    Standard controls have the Raise Control on the right and the Tilt Control on the left.

    If you are unsure please contact us on 01949 845399

    Starwood Tapes

    Starwood blinds are available with either colour co-ordinating ladder braids or with a colour co-ordinating 25mm tape.

    If you select recommended tapes your chosen slat colour will come with the below tape colour

    Glacier Slat - Arctic Tape

    Divine Slat - Linen Tape

    Marlin Slat - Solis Tape

    Pavilion Slat - Shadow Tape

    Empire Slat - Dusk Tape

    Volt Slat - Smoke Tape

    Soho Slat - Canvas Tape

    Bali Slat - Husk Tape

    Alternatively you can select the tape colour of your choice

    Starwood Tape Collection

    Starwood Valance and Returns

    Your Starwood Blind comes complete with a co-ordinated plain valance which covers the head rail.

    If your blind is being fitted into a recess the valance will hide the head rail.

    However if you are fitting the blind outside of the recess you will be able to see the ends of the head rail. In this instance you can choose to add mitred valance returns to your order. These fit at right angles to the matching valance and will hide the ends of the head rail.

    Plain Valance will be approximately 12mm longer than the blind headrail of the blind

    Valance with mitred returns will be approximately 14mm longer than the headrail of the blind

     

    Starwood Stained Ends

    Starwood Slats are cut to size, so the Slat ends are in the natural wood finish.

    If your blind is being fitted into a recess you will not see the slat ends.

    However if your blind is being fitted outside of the recess you may want to choose to have the ends of the slats stainded in the slat colour.

    Get in Touch

    Telephone: 01949 845399

    Email: info@valeblinds.com

    Opening Hours:
    Mon-Fri 9.00am-5.00pm

    Opayo by Elavon
    VISA Accepted
    Mastercard Accepted
    Maestro Accepted
    Pay by PayPal
    Where affordability never compromises quality

    “Where affordability never compromises quality”

    ®VELUX and VELUX logo are registered trademarks owned by VKR Holdings A/S