Decora 89mm Fabric Box Blackout Vertical Blind

Inside Recess

The recess is inside the window opening. Choose this option if you want to the blind to lie in the recess of the window.

Width: Measure the inside width of the window at the top middle and bottom. Use the narrowest width measurement always using a metal tape measure.

Height: Measure the height of the window at the left, centre and right. Use the shortest height measurement always using a metal tape measure.

We will deduct the manufacturers recommended tolerance off the width/drop of the blind to ensure the blind operates perfectly within the window recess.

Outside Recess/Exact

Outside Recess/Exact is the outside of the window opening, overlapping the window recess. Choose this option if you want the blind to overlap the window recess.

Width
To minimise light leakage it's recommended that the blind overlaps the window recess on the width by least 40mm each side (60mm in the case of vertical blinds).

Height
When measuring the height take into account the required space for the mounting bracket. A flat surface of a minimum 70mm above is required (50mm in the case of vertical blinds). The overlap at the bottom of the blind is a matter of personal choice but please take into account obstacles such as radiators.

If you are unsure please contact us on 01949 845399

Decora Vertical - Head Rail

As standard your Decora Fabric Box Vertical Blind will come with the Cruze headrail available in Gloss White, Matt White and Matt Anthracite. 

Head Rail Dimensions are approximately

30mm high x 36mm wide 

Decora Vertical – Draw Control

The Draw Control allows you to open all the louvres on your blind to the specified stacking side.

As standard your Decora Fabric Box Vertical Blind will come with the Draw Control on the Right in White.

Alternatively you can select an Anthracite cord control and also select which side you require it to be on.

NOTE: Both Draw and Tilt Controls must be on the same side

You can also choose to draw your blinds with Clear Wand which will always been on the leading edge of the vanes, this will operate the draw and also the tilt of the vanes - see image below.

Use the wand to draw the slats to the stacking position

Twist the wand to tilt the slats in either direction

If you are unsure please call us on 01949 845399

Decora Vertical – Tilt Chain

As standard your Decora Fabric Box Vertical Blind will come with the Tilt Chain in White.

Alternatively you can change this to Anthracite, Copper, Gold or Nickel.

NOTE: Both Tilt and Draw Controls must be on the same side

If you are unsure please call us on 01949 845399

Decora Vertical – Stabilising Chain

The Stabilising Chain is the chain that connects the louvres and runs along the bottom of each one.

As standard your Decora Fabric Box Vertical Blind will come with a White stabilising chain.

Alternatively you can select to have your Stabilising Chain in Anthracite, Copper, Gold or Nickel finish.

You can also choose to have sewn in bottom weights with no stabilising chain

Blind Installation Heights

The 2014 changes to the child safety requirements of BS EN 13120:2009+A12014 place an obligation on all blind manufacturers to sell compliant products.

If you do not know the installation height of the blind please enter 00 in the box and your blind will be manufactured in accordance with the Safety Regulation requirements.

If you input an installation height (this is the height the mounting brackets will be installed above the floor level) then your blind may be manufactured with longer controls providing they confirm to the child safety legislation.

For windows in unusual positions or installed extremely high, please contact us.

If you are unsure please contact us on 01949 845399