Decora 25mm Wood Effect Metal Venetian Blind

Inside Recess

The recess is inside the window opening. Choose this option if you want to the blind to lie in the recess of the window.

Width: Measure the inside width of the window at the top middle and bottom. Use the narrowest width measurement always using a metal tape measure.

Height: Measure the height of the window at the left, centre and right. Use the shortest height measurement always using a metal tape measure.

We will deduct the manufacturers recommended tolerance off the width/drop of the blind to ensure the blind operates perfectly within the window recess.

Outside Recess/Exact

Outside Recess/Exact is the outside of the window opening, overlapping the window recess. Choose this option if you want the blind to overlap the window recess.

Width
To minimise light leakage it's recommended that the blind overlaps the window recess on the width by least 40mm each side (60mm in the case of vertical blinds).

Height
When measuring the height take into account the required space for the mounting bracket. A flat surface of a minimum 70mm above is required (50mm in the case of vertical blinds). The overlap at the bottom of the blind is a matter of personal choice but please take into account obstacles such as radiators.

If you are unsure please contact us on 01949 845399

Decora Metal Venetian Blinds

Decora Express 25mm Metal Venetian Blinds are operated via colour matched Lift/Raise cord control on the left or the right hand side and Clear Plastic Wand Tilt Controls on either the left or the right hand side of the blind.

25mm Blinds with a width of 225mm or below will have NO Tilt control and NO Lift/Raise control.

Blinds less than 455mm wide are manufactured with the tilt and lift controls on different sides.

Decora 35 & 50mm Metal Venetian Blinds are operated via colour matched Tilt cord and Lift/Raise cord on the left or the right hand side of the blind.

35 & 50mm Blinds with a width of 300mm or below will have NO Tilt control and NO Lift/Raise control.

Tilt and Lift/Raise controls can be placed on the same side but size restrictions apply.

Decora 25mm Metal Venetian Blinds

Side Guiding is suitable for windows with up to a maximum of a 25 degree angle.

These can also be used for doors to hold the blind in place when the door is opened and closed.

Decora Metal Venetian Blinds

Your Decora Metal Venetian Blind comes complete with Top/Face Fix brackets as standard.

Blind Installation Heights

The 2014 changes to the child safety requirements of BS EN 13120:2009+A12014 place an obligation on all blind manufacturers to sell compliant products.

If you do not know the installation height of the blind please enter 00 in the box and your blind will be manufactured in accordance with the Safety Regulation requirements.

If you input an installation height (this is the height the mounting brackets will be installed above the floor level) then your blind may be manufactured with longer controls providing they confirm to the child safety legislation.

For windows in unusual positions or installed extremely high, please contact us.

If you are unsure please contact us on 01949 845399