VALE Nativo Tri-Shade Blind

Inside Recess

The recess is inside the window opening. Choose this option if you want to the blind to lie in the recess of the window.

Width: Measure the inside width of the window at the top middle and bottom. Use the narrowest width measurement always using a metal tape measure.

Height: Measure the height of the window at the left, centre and right. Use the shortest height measurement always using a metal tape measure.

We will deduct the manufacturers recommended tolerance off the width/drop of the blind to ensure the blind operates perfectly within the window recess.

Outside Recess/Exact

Outside Recess/Exact is the outside of the window opening, overlapping the window recess. Choose this option if you want the blind to overlap the window recess.

Width
To minimise light leakage it's recommended that the blind overlaps the window recess on the width by least 40mm each side (60mm in the case of vertical blinds).

Height
When measuring the height take into account the required space for the mounting bracket. A flat surface of a minimum 70mm above is required (50mm in the case of vertical blinds). The overlap at the bottom of the blind is a matter of personal choice but please take into account obstacles such as radiators.

If you are unsure please contact us on 01949 845399

Your Vale Tri-Shade blind is operated by means of a loop chain in various colours on either the left or the right of the blind. This will be provided with a Child Safety tensioning device that must be fitted at the point of installation.

Please bear in mind the light gaps between the fabric edge and the cassette edge.

On the control side there is 18mm gap and on the opposite side 10mm gap.

Alternatively you can choose the Somfy rechargeable battery operation. This comes with an integrated motor that carries integrated rechargeable batteries. 

These batteries can be charged using the charger but as they integrated they cannot be replaced.

If you are unsure please contact us on 01949 845399

Remote Control Handsets

If purchasing a manual blind please select 'Not Required' to this option.

If you have more than one blind on your order you need only select the required remote control on one blind.

	Situo 1 Variation RTS II Pure Single Channel Remote The control wheel offers greater precision when tilting the slats of the blind Can have upto 8 items operating in unison on the single channel
	Situo 5 Variation RTS II Pure Multi Channel Remote 4 Single channels and 1 Multi channel function Offers the ability to operate multiple blinds independently from 1 remote Each channel can have upto 8 items operating in unison
	Smoove 1 RTS Wall Switch Pure Secure, single channel RTS (operates one blind or group of blinds simultaneously) Battery powered control unit that can be placed anywhere within range

If you are unsure please contact us on 01949 845399

Your Vale Tri-Shade blind has an Aluminium Cassette/Head Box and Bottom Bar which is available in various colours.

Colours available are White, Cream, Silver, Brown, Anthracite and Black

If you are unsure please contact us on 01949 845399

Your Vale Tri-Shade blinds is available with Top Fix or Face Fix brackets.

Please Note: the manufacturer does not supply screws for the fitting of the blinds as they do not know what you are fixing into.

If you are unsure please contact us on 01949 845399

If you are ordering several blinds that are to be installed side by side a 100% match in height of the fabric stripes cannot be guaranteed on account of dimensional tolerances in the woven stripe.

However if they are being installed at the same height from the ground we will endeavour to get it as close as possible.

When you go on with operating the system, the bottom rail will be lifted by 3cm. In the opened state, the fabrics are positioned at the same height.

If you are unsure please contact us on 01949 845399

Blind Installation Heights

The 2014 changes to the child safety requirements of BS EN 13120:2009+A12014 place an obligation on all blind manufacturers to sell compliant products.

If you do not know the installation height of the blind please enter 00 in the box and your blind will be manufactured in accordance with the Safety Regulation requirements.

If you input an installation height (this is the height the mounting brackets will be installed above the floor level) then your blind may be manufactured with longer controls providing they confirm to the child safety legislation.

For windows in unusual positions or installed extremely high, please contact us.

If you are unsure please contact us on 01949 845399