VALE INTU 25mm Venetian Blind

INTU/SimpleFit Bead Depth

It is important when ordering the INTU or SimpleFit blinds that your windows have a suitable rubber bead that accepts fitting of the brackets.

Please follow the below instructions to accurately measure your bead depth then select one of the depth options.

NOTE:

The maximum Bead Depth is 27mm

The minimum Bead Depth is 11mm

INTU Side Profiles

It is important when ordering INTU blinds that you select the correct shaped side profiles.

INTU Control Options

Your INTU Venetian Blind comes complete with a slide Tilt Control in the head rail and an Integrated Bottom Rail Handle.

By moving the slide tilt to the left or right you can alter the angle that the slats are open.

The Integrated Handle in the bottom bar allows you to raise and lower the blind whilst maintaining its stylish appearance.

If your INTU Venetian blind is being installed out of day to day reach, you can purchase a rod. The specially designed operating rods in with 300mm or 600mm lengths allow you to alter the slat angle.(see image)

INTU Hardware Colour

Your INTU blinds will come complete with cassette and best fit side profiles in the same finish.

Roller Headrail Venetian Headrail

The INTU Pleated blinds have the same type of head rail as the venetian blinds but without the centre tilt control.

You can select White, Silver or Brown which ever suits your windows and decor.

If you have insufficient clearance on your window frame or glazing bar you will require the modified reduced headrail.

The reduction will be 10mm per side

Headrail depth is approximately 50mm

If you are unsure please contact us on 01949 845399

INTU/SimpleFit Window Type

These blinds are suitable for modern UPVC windows only

INTU Operating Rod

If you cannot reach your blind you can choose either a 300mm or a 600mm long control rod that will enable you to tilt the slats.

If you are unsure please call on 01949 845399