VALE Battery Operated Remote Blackout Blind

Place your mouse over this image

40%OFF

Info
Installation Instructions (3)
Delivery

Specification:

No electrical wires
No expensive fitting costs
Installed and set up in minutes
5 Channel remote control (operates upto 25 blinds in total)
35mm and 40mm Tubes used dependent on blind size
Supplied with 1 Lithium battery charger that can be on the left or the right
Bracket Size approximately 5.5cm wide x 7cm

Size Restrictions:

Min width 455mm - Max width 2500mm dependent on cloth

Max Drop 2900mm dependent on cloth

Delivery

For full details of our delivery times please
click here

VALE Battery Operated Remote Blackout Blind

RE0341-Heather

Order Code

4641

RRP from

£118.43

Our price from

£71.05

VALE “One Touch“ battery remote blinds. Remote control blinds used to be seen as an unnecessary extravagance.

This product range offers a chance of Affordable luxury for all.

Battery Motorised Roller blinds are simple in design, brilliantly child friendly, stylish and easy to operate and more importantly simple to install

No wires!No electricians!No expensive fitting Costs! Installed and set up in Minutes!

The blind can be rolled up or down and stopped at any point to achieve the required level of shading for you

The “One Touch” operation means you will never have to worry again about untidy cord or control chains flapping about at window and spoiling the clean lines of your blind.

The new generation “One Touch” remote blind operates using a 5 channel remote control, the batteries and motor being inbuilt and each blind is supplied with lithium battery charger with a 4 meter lead wire for ease of charging

Price in GBP

RRP from

£118.43

Our price from

£71.05

Measurement
Millimetres
Centimetres
Inches
Width
*
help text
Drop
*
help text

Notification Message close

Recess or Exact

Motor/Charger Point

Roll Option

Inside Recess

The recess is inside the window opening. Choose this option if you want to the blind to lie in the recess of the window.

Width: Measure the inside width of the window at the top middle and bottom. Use the narrowest width measurement always using a metal tape measure.

Height: Measure the height of the window at the left, centre and right. Use the shortest height measurement always using a metal tape measure.

We will deduct the manufacturers recommended tolerance off the width/drop of the blind to ensure the blind operates perfectly within the window recess.

Outside Recess/Exact

Outside Recess/Exact is the outside of the window opening, overlapping the window recess. Choose this option if you want the blind to overlap the window recess.

Width
To minimise light leakage it's recommended that the blind overlaps the window recess on the width by least 40mm each side (60mm in the case of vertical blinds).

Height
When measuring the height take into account the required space for the mounting bracket. A flat surface of a minimum 70mm above is required (50mm in the case of vertical blinds). The overlap at the bottom of the blind is a matter of personal choice but please take into account obstacles such as radiators.

If you are unsure please contact us on 01949 845399

Motor/Charger Point

Your Vale Battery remote control blackout blind comes complete with a Rechargeable Lithium Battery Pack and charger which can either be on the right or the left of the blind depending which is the best for you.

Your blind also comes complete with a 6 channel remote control which can operate up to 25 blinds in total.

If you are ordering more than 1 blind you will not need the charger and the remote on the second blind.

If you have any queries please contact us on 01949 845399

Roller Blind - Standard or Reverse Roll

Standard Roll

All Roller blinds are made as Standard - with the fabric falling off the roller towards the window. This option as always recommended when using a Dim out / Blackout fabric as this will reduce the light entering the room because the fabric will be closer to the window frame.

Standard or Reverse Roll Image

Reverse Rolled

A Reverse rolled Roller blind is made with the fabric falling off the roller away from the window. This is usually preferred when you are trying to miss PVC window handles. We always recommend this option when ordering a printed fabric.