Luxaflex 70mm Metal Venetian Blind

Inside Recess

The recess is inside the window opening. Choose this option if you want to the blind to lie in the recess of the window.

Width: Measure the inside width of the window at the top middle and bottom. Use the narrowest width measurement always using a metal tape measure.

Height: Measure the height of the window at the left, centre and right. Use the shortest height measurement always using a metal tape measure.

We will deduct the manufacturers recommended tolerance off the width/drop of the blind to ensure the blind operates perfectly within the window recess.

Outside Recess/Exact

Outside Recess/Exact is the outside of the window opening, overlapping the window recess. Choose this option if you want the blind to overlap the window recess.

Width
To minimise light leakage it's recommended that the blind overlaps the window recess on the width by least 40mm each side (60mm in the case of vertical blinds).

Height
When measuring the height take into account the required space for the mounting bracket. A flat surface of a minimum 70mm above is required (50mm in the case of vertical blinds). The overlap at the bottom of the blind is a matter of personal choice but please take into account obstacles such as radiators.

 

If you are unsure please contact us on 01949 845399

Luxaflex® Metal 50/70mm Control Options

As standard your Luxaflex® Metal Venetian blind comes complete with Cord Lift and Cord Tilt controls.

As alternative you can select to have the Endless Chain control that operates both the tilting and lifting of the slats.

The following is an image of the Child Safety Breakaway Connector

Fully electrically operated blinds available POA

If your are unsure please contact us on 01949 845399

Luxaflex Metal Venetian 50 & 70mm Ellisse® System

Ellisse® with Aluminium

Easy tilting of the slats with a tilt rod

Aluminium head and bottom rail in a natural grey finish

Ellisse® with Wood Elements

Wood inserts in the aluminium head rail

Wood bottom rail with wood inserts in the tassels

 

If you are unsure please contact us on 01949 845399

Luxaflex® Metal Venetian Ellisse® Controls

If you are unsure please contact us on 01949 845399

Luxaflex 50 & 70mm Metal Venetian Fusion Valance

Personalise your Luxaflex Metal Venetian blind by adding the Fusion Valance.

This special option comes with a decorative aluminium valance and bottom rail for a designer look.

If you are unsure please contact us on 01949 845399

Luxaflex® 50 & 70mm Metal Venetian Blinds Tapes (Not available with 50mm Traditional end slats)

Luxaflex® Metal Venetian Blinds

Choose from 20 different fabric tapes (25mm wide) and 24 designer tapes (40mm wide) to co-ordinate or contrast with your slat choice.

Please Note: Tapes not available on blinds with mono control option

• 
• 
• 
• 
• 
• 
  G
• 
  X
• 
• 
  O
• 
  N
• 
  K
• 
  F
• 
  U
• 
  R
• 
  C
• 
  I
• 
  H
• 
  M
• 
  J
• 
  L
• 
  DT-70
• 
  DT-76
• 
  DT-2
• 
  DT-11
• 
  DT-71
• 
  DT-77
• 
  DT-12
• 
  DT-72
• 
  DT-51
• 
  DT-1
• 
  DT-13
• 
  DT-73
• 
  DT-50
• 
  DT-22
• 
  DT-15
• 
  DT-74
• 
  DT-53
• 
  DT-24
• 
  DT-3
  
• 
  DT-75
• 
  DT-52

• 
  DT-23

• 
  DT-10

• 
  DT-2

• 
  DT-9

If you are unsure please contact us on 01949 845399

Luxaflex® Metal Hold Down Clips

 

Hold Down Clips are ideal if you are putting your blind on an door.

The Clips will hold the bottom rail against the door, when it is opened and closed, to prevent it from moving.

 

If you are unsure please contact us on 01949 845399

Luxaflex® Metal side guiding

Side Guiding

Side guiding is a system for holding a metal venetian blind in place when attached to an opening door. The blind has a cord that run down the side through the ends of each slat. It allows the user to operate the slats whilst the blind is still attached to the door.

If you are unsure please contact us on 01949 845399

Luxaflex® Metal Venetian Head and Bottom Rails

As standard your Luxaflex Metal Venetian Blind will have colour co-ordinating Head and Bottom rails made from high quality steel, with colour co-ordinating durable plastic components (where possible)

If you would like to know which head rail Luxaflex use for your colour choice please contact us on 01949 845399

If you want to know what colour your head and bottom rail will be please contact us on 01949 845399

Blind Installation Heights

The 2014 changes to the child safety requirements of BS EN 13120:2009+A12014 place an obligation on all blind manufacturers to sell compliant products.

If you do not know the installation height of the blind please enter 00 in the box your blind will be manufactured in accordance with the Safety Regulation Requirements.

If you input an installation height (this is the height the brackets will be installed above the floor level) then your blind may be manufactured with longer controls providing they confirm to the child saftey legislation.

For windows in unusual positions or installed extremely high, please contact us.

If you are unsure please contact us on 01949 845399