Decora Roller Blind - Fabric Box Blackout

Inside Recess

The recess is inside the window opening. Choose this option if you want to the blind to lie in the recess of the window.

Width: Measure the inside width of the window at the top middle and bottom. Use the narrowest width measurement always using a metal tape measure.

Height: Measure the height of the window at the left, centre and right. Use the shortest height measurement always using a metal tape measure.

We will deduct the manufacturers recommended tolerance off the width/drop of the blind to ensure the blind operates perfectly within the window recess.

Outside Recess/Exact

Outside Recess/Exact is the outside of the window opening, overlapping the window recess. Choose this option if you want the blind to overlap the window recess.

Width
To minimise light leakage it's recommended that the blind overlaps the window recess on the width by least 40mm each side (60mm in the case of vertical blinds).

Height
When measuring the height take into account the required space for the mounting bracket. A flat surface of a minimum 70mm above is required (50mm in the case of vertical blinds). The overlap at the bottom of the blind is a matter of personal choice but please take into account obstacles such as radiators.

 

If you are unsure please contact us on 01949 845399

As Standard the Decora Roller Blinds come with a Right Hand plastic chain on the right.

You can choose to have your control on the left; you can also choose to have a Nickel Chain on the Right or the Left.

Alternatively you can choose to have a Sprung Blind and choose a decorative pull.

PLEASE NOTE: Blinds over 2000mm width/drop will automatically come with a Nickel Chain.

Electric or battery operation is available on request.

Standard Roll

All Roller blinds are made as Standard (with the fabric falling off the roller towards the window) This option as always recomended when using a Dim out / Blackout fabric as this will prevent less light entering the room because the fabric will be closer to the window frame!

Reverse Rolled

A Reverse rolled Roller blind is made (with the fabric falling off the roller away the window) this is usually prefered when you are trying to miss PVC window handles. We always recommend this option when ordering a printed fabric!

If you are unsure please contact us on 01949 845399

If you choose a sprung blind you can also choose a decorative pull from the options below for the centre of the bottom of your blind.

Alternatively customers occasionally, although they have a side chain blind, choose to have a decorative pull just for decoration to co-ordinate with their blind.

If you are unsure please contact us on 01949 845399

As standard your Decora roller blind will have a standard sewn bottom pocket. Or you can have the Double Fabric wrapped bottom bar where the fabric is wrapped around the bottom rail.

Alternatively can personalise your Decora Roller Blind by choosing one of the Unishade metallic finished bottom rails or a Sunwood 50mm bottom bar. 

 

If you are unsure please contact us on 01949 845399

Why not personalise your Decora Roller Blind with equally spaced eyelets along the bottom of the blind. The number of Eyelets will depend on the width of the blind.

Available in 7 colours ways

If you are unsure please contact us on 01949 845399

Personalise your Decora roller blind by adding a 36mm pocket to the bottom in a contrasting Splash Fabric colour of your choice. As this is a pocket you will see 18mm of contrasting fabric colour from the front and back of your blind. See below for an example.

Choose from 60 different coloured splash fabrics.

If you are unsure please call us on 01949 845399

Blind Installation Heights

The 2014 changes to the child safety requirements of BS EN 13120:2009+A12014 place an obligation on all blind manufacturers to sell compliant products.

If you choose an 'Not Known Installation Height' from the drop down box your blind will be manufactured in accordance with the Safety Regulation Requirements.

If you select an installation height (this is the height the brackets will be installed above the floor level) then your blind will be manufactured taking this into account.

If you are unsure please contact us on 01949 845399