50mm Decora Wooden Venetian Blind

Inside Recess

The recess is inside the window opening. Choose this option if you want to the blind to lie in the recess of the window.

Width: Measure the inside width of the window at the top middle and bottom. Use the narrowest width measurement always using a metal tape measure.

Height: Measure the height of the window at the left, centre and right. Use the shortest height measurement always using a metal tape measure.

We will deduct the manufacturers recommended tolerance off the width/drop of the blind to ensure the blind operates perfectly within the window recess.

Outside Recess/Exact

Outside Recess/Exact is the outside of the window opening, overlapping the window recess. Choose this option if you want the blind to overlap the window recess.

Width
To minimise light leakage it's recommended that the blind overlaps the window recess on the width by least 40mm each side (60mm in the case of vertical blinds).

Height
When measuring the height take into account the required space for the mounting bracket. A flat surface of a minimum 70mm above is required (50mm in the case of vertical blinds). The overlap at the bottom of the blind is a matter of personal choice but please take into account obstacles such as radiators.

If you are unsure please contact us on 01949 845399

These blinds come with a Tilt Cord Control to enable you to adjust the angle of the slats and a Raise/Lower Cord Control to enable you to lift and lower the blind completely.

Standard controls have the Raise Control on the right and the Tilt Control on the left.

For blinds over 450mm wide you can choose which side you have your controls on.

If you are unsure please contact us on 01949 845399

Decora Wooden Venetian Blind Tassel/Pull

As standard your Decora Wooden Venetian Blind will come complete with colour co-ordinated tassels/pulls on the end of the controls cords.

Alternatively you can chose a Cylinder Tassel/Pull.

Available in Anthracite, Black, Brass, Brushed Aluminium, Chrome, Copper and White.

If you are unsure please contact us on 01949 845399

Decora Wooden Venetian Blinds

As standard your Decora wooden Venetian Blind will be manufactured with colour co-ordinated ladder braids and cords. As an alternative you can choose decorative tapes.

19mm wide tapes on 25mm wood slats

38mm wide tapes on 35mm wood slats

25 or 38mm wide tapes on 50mm wood slats

HERRINGBONE WEAVE - 19mm, 25mm & 38mm WIDE

Cotton	Chalk	Barley	Vanilla	Ecru
Mist	Light Beige	Truffle	Hessian	Camel
Toffee	Coffee	Dove	Steel	Slate
Jet	Flint	Gallant	Lunar	Pebble

If you are unsure please contact us on 01949 845399

Valance Returns

Your wooden venetian blind comes complete with a co-ordinated valance which covers the metal head rail.

If your blinds is being fitted into a recess this will not be visible.

However if you are fitting your blind outside the recess you will be able to see the ends of the metal head rail. In this instance you can choose to add Valance Returns to your order.

These fit at right angles to the valance and cover the metal head rail.

This image is an example of a valance with returns (shape may vary)

Alternatively if you are selecting an Essential Colour slat you can have the Contour Valance or Valance & Returns in a matching finish, see below for examples

See below for Box End bracket measurements

If you are unsure please contact us on 01949 845399

Wooden Venetian Blinds Stained Ends

As wooden venetian blind slats are cut to length the ends are in the woods natural state.

If your blind is being fitted into a recess these will not be visible.

However if your blind is being fitted outside the recess the ends will be visible. In this instance you can choose to have the natural slat ends stained to closely match the slat colour.

If you are unsure please contact us on 01949 845399

If you are ordering Blinds to sit next to each other or in a bay you can select to have the slats/vanes lining up across several blinds. The Blinds must be installed at the same height and have the same drop.

The manufacturers will align the slats/vanes as closely as possible.