VALE Roman Blind - Pure Collection

Inside Recess

The recess is inside the window opening. Choose this option if you want to the blind to lie in the recess of the window.

Width: Measure the inside width of the window at the top middle and bottom. Use the narrowest width measurement always using a metal tape measure.

Height: Measure the height of the window at the left, centre and right. Use the shortest height measurement always using a metal tape measure.

We will deduct the manufacturers recommended tolerance off the width/drop of the blind to ensure the blind operates perfectly within the window recess.

Outside Recess/Exact

Outside Recess/Exact is the outside of the window opening, overlapping the window recess. Choose this option if you want the blind to overlap the window recess.

Width
To minimise light leakage it's recommended that the blind overlaps the window recess on the width by least 40mm each side (60mm in the case of vertical blinds).

Height
When measuring the height take into account the required space for the mounting bracket. A flat surface of a minimum 70mm above is required (50mm in the case of vertical blinds). The overlap at the bottom of the blind is a matter of personal choice but please take into account obstacles such as radiators.

If you are unsure please contact us on 01949 845399

Vale Roman Blind Control Option

As standard your Vale Roman blind will come complete with a White Plastic chain control on either the left or the right of the blind.

As an alternative you can select a Silver or Brass metal chain on either the left or the right.

For ease of use you could select the Rechargeable Battery Opertion. This comes complete with the Somfy 25 RTS Raise & Lower Motor, External LI-ION battery pack, Charger plug with 4m cable and the Situo 1 Pure II remote control

Mains Electric Operation - Prices on request 

Minimum width for Battery Operation - 470mm

Minimum width for Mains Electric Operation - 750mm

Vale Roman Blind Linings

As standard your Vale Roman Blind will come complete with a premier twill lining as standard. This Lining is 50% cotton 50% polyester twill with crease resistant finish.

As an alternative you can select to upgrade your lining to Blackout, Thermal or Bonded Interlining.

Blackout Lining

This lining is available in white or ivory and is 30% cotton and 70% polyester. It will significantly reduce the amount of light coming through the window though light will still be visible around the edge of the blind.

Thermal Lining

The thermal lining is 50% cotton and 50% polyester which is coated on one side. This gives it insulating properties which help to reduce heat loss from a window.

Bonded Interlining

The Bonded Interlining is 100% cotton face with a polyester fleece backing. Interlining gives a fabric a more luxurious drape and is particularly beneficial for use with lighter weight fabrics. Interlining is perfect to reduce heat loss through a door or window.

If you are unsure please contact us on 01949 845399

Vale Roman Blind Pelmet

Why not add a little extra something to your standard Vale Roman Blind.

You can choose to add the 90mm deep pelmet at the top of the blind.

If you are unsure please contact us on 01949 845399

Blind Installation Heights

The 2014 changes to the child safety requirements of BS EN 13120:2009+A12014 place an obligation on all blind manufacturers to sell compliant products.

If you do not know the installation height of the blind please enter 00 in the box and your blind will be manufactured in accordance with the Safety Regulation requirements.

If you input an installation height (this is the height the mounting brackets will be installed above the floor level) then your blind may be manufactured with longer controls providing they confirm to the child safety legislation.

For windows in unusual positions or installed extremely high, please contact us.

If you are unsure please contact us on 01949 845399