- Downloads (4)
NOTE: To prevent the blind sagging, this blind has wire supports running through the length of the blind. These are initially inset approximately 40mm from each side followed by approximately every 500mm symmetrically
Min Width - 260mm - Max Width - 2500mm
Min Drop - 100mm - Max Drop - 3800mm
Wire Free is available to a maximum width of 1200mm & has to be ordered with the four sided lantern frame kit ONLY
VALE Blinds Electrically Operated Honeycomb Flat Roof Blind
VALE BLINDS are now able to offer Fully Electric or Battery Powered Flat Roof Blinds
The system comprises of a choice of a 25mm honeycomb pleated blinds adding insulation. The blind can be supplied with side cover L profiles or the NEW four sided Easy Fit Lantern Frame Kit.
The blind requires a 13amp Switched supply ideally mounted approximately 100mm above the installation height of the blind. This will feed a 24v dc system, the motor is mounted within the head rail and the transformer can be mounted at your convenience, connected via a small gauge twin cable.
The mechanics are provided by Somfy using the latest RTS signalling, making use of a multi-channel remote, allowing you to operate more than one blind with the same control
VALE BLINDS system is designed for square and regular shaped Dome and Tunnel windows.
The inside recess is the area from the flat of your ceiling extending upward inside the tunnel/dome until it reaches the glass of the window. This distance will vary in each individual case, the blind can be fitted squarely and horizontally within the recess either close to the glass or the ceiling opening, you decide.
Inside Recess Measuring guide
Firstly decide upon the height of your blind within the tunnel,
WIDTH: Measure the inside width of the opening on the right, middle and left, as plaster work is often not square always use the narrowest width measurement.
LENGTH: Measure the length of the window opening at the right, middle and left, as plaster work is often not square always use the narrowest length measurement.