Flat Roof Translucent Blind
- Recess Fit Only
- White Head Rail and Bottom Bar
- L shaped white side profiles available
- Tensions cords to prevent fabric from sagging - number determined by blind width
The number of tension wires depends on the width of the blind
500mm wide = 3 tension wires
1000mm wide = 5 tension wires
1500mm wide = 7 tension wires
This system is designed to fit within the flat roof recess, even better YOU choose where to mount the blind within recess, the blind is descrete and unobtrusive.
Width: Measure the inside width of the window opening at the top middle and bottom. Use the narrowest width measurement.
Drop: Measure the drop of the window opening at the left, centre and right. Use the shortest drop measurement
This system is designed to fit on to the flat of your ceiling, completely covering the window opening.
This option comes complete with a 4-sided wooden frame.
Suggested Minimum Dimensions
Width: It is recommended that the blind overlaps the window opening on the width by a minimum of 90mm
Drop: It is recommended that the blind overlaps the window opening on the drop by a minimum of 90mm
Actual window opening: 1000mm width x 1000mm drop
Order the blind: 1090mm width x 1090mm drop
Still not clear? VALE - help is just a click away
VALE offer an automated version of this blind. Please contact us for details.