The Honeycomb Day & Night blind comes in a variety of colours with a white head rail, middle rail and bottom bar and matching easy fit white side profiles.
To date, side channels have always caused fitting issues, so VALE have designed the side channels to be fitted after the blind has been installed making this a very simple process
This system is designed to fit within the flat roof recess, even better YOU choose where to mount the blind within recess, the blind is descrete and unobtrusive.
Width: Measure the inside width of the window opening at the top middle and bottom. Use the narrowest width measurement.
Drop: Measure the drop of the window opening at the left, centre and right. Use the shortest drop measurement
This system is designed to fit on to the flat of your ceiling, completly covering the window opening
Suggested Minimum Dimensions
Width: It is recommended that the blind overlaps the window opening on the width by a minimum of 90mm
Drop: It is recommended that the blind overlaps the window opening on the drop by a minimum of 90mm
Actual window opening: 1000mm width x 1000mm drop
Order the blind: 1090mm width x 1090mm drop
Still not clear? VALE - help is just a click away
To prevent the fabric from sagging there is a series of 2mm thick tension wires that run through the fabric. These are visible when the blind is open.
The number of tension wires depends on the width of the blind
500mm wide = 3 tension wires
1000mm wide = 5 tension wires
1500mm wide = 7 tension wires
FREE UK MAINLAND DELIVERY ON ALL ORDERS OVER £75.00