25+ Years Experience

25+ Years Experience

Reliable Delivery Service

Reliable Delivery Service

High Quality Materials

High Quality Materials

VALE Roman Blind - Pure Collection

Place your mouse over this image

On offer

55%OFF

  • 1 Year Guarantee
  • Info
  • Downloads (1)

STANDARD SPECIFICATION:

  • White Plastic Chain Operation with child safe tension device
  • Face fix White Brackets
  • Fully lined in Premier Twill Fabric
  • All blinds are supplied with taping. Stitching goes across the lining of the fabric securing a special tape and is used in conjunctions with support rods to maintain the profile of the fabric.
  • Blinds are finished with tacking stiches that discreetly attach the face fabric to the lining.
  • ALTERNATE OPTIONS:

  • Silver or Brass Metal Chain Operation
  • Battery Operation with Remote
  • Alternate Linings – Blackout, Thermal or Interlining
  • 90mm Deep Pelmet
  • NOTE: Minimum Width 220mm

    Any size is available up to a maximum width of 2500mm and 2400mm drop. If the blind requires more than one width of fabric the blind will be made with a full width central panel and a smaller pattern match panel at each side. This will usually be required for blinds wider than 1320mm.

    VALE Roman Blind - Pure Collection

    Foulis Neutral

    Order Code
    6997
    £310.21
    £139.60

    VALE ROMAN BLINDS are fully lined and are supplied corded on to a chain operated headrail with brackets ready for installation.

    Available in a wide range of modern fabrics with a choice of alternative linings.

    Also available with Battery Remote Control Operation.

    Any size is available up to a maximum width of 2500mm and 2400mm drop. If the blind requires more than one width of fabric the blind will be made with a full width central panel and a smaller pattern match panel at each side. This will usually be required for blinds wider than 1320mm.

    Wide Blind Prices available on request

    Price in GBP
    £310.21
    £139.60
      • *
      • *
      • Calculate
      Click for help
      Click for Help
      Click for Help
      Click for Help
      Click for help
      4 chars left.

      Inside Recess

      recess_fit.jpg

      The recess is inside the window opening. Choose this option if you want to the blind to lie in the recess of the window.

      Width: Measure the inside width of the window at the top middle and bottom. Use the narrowest width measurement always using a metal tape measure.

      Height: Measure the height of the window at the left, centre and right. Use the shortest height measurement always using a metal tape measure.

      We will deduct the manufacturers recommended tolerance off the width/drop of the blind to ensure the blind operates perfectly within the window recess.

       

      Outside Recess/Exact

      exact_fit.jpg

      Outside Recess/Exact is the outside of the window opening, overlapping the window recess. Choose this option if you want the blind to overlap the window recess.

      Width
      To minimise light leakage it's recommended that the blind overlaps the window recess on the width by least 40mm each side (60mm in the case of vertical blinds).

      Height
      When measuring the height take into account the required space for the mounting bracket. A flat surface of a minimum 70mm above is required (50mm in the case of vertical blinds). The overlap at the bottom of the blind is a matter of personal choice but please take into account obstacles such as radiators.

       

      If you are unsure please contact us on 01949 845399

      Vale Roman Blind Control Option

      As standard your Vale Roman blind will come complete with a White Plastic chain control on either the left or the right of the blind.

      As an alternative you can select a silver or brass metal chain on either the left or the right.

       

      If your blind is hard to reach or you do not want a hanging chain then you can choose to have the battery remote control operation. This has a motor with a single reloadable lithium battery wand. (Other motors and battery wands available on request)

      This is available with a Telis 1 channel remote control.

      If you have more than one blind you can choose to have the Telis 4, 5 channel remote control.

      So if you order more than one blind to be operated from the same remote control select the Battery Operation & 5 Channel Remote on one blind and the Battery Operation & No Remote on the other blinds. (Other motors and battery wands available on request)

      If you are unsure please contact us on 01949 845399

      Vale Roman Blind Linings

      As standard your Vale Roman Blind will come complete with a premier twill lining as standard. This Lining is 50% cotton 50% polyester twill with crease resistant finish.

      Standard_Lining.jpg

      As an alternative you can select to upgrade your lining to Blackout, Thermal or Bonded Interlining.

      Blackout Lining

      This lining is available in white or ivory and is 30% cotton and 70% polyester. It will significantly reduce the amount of light coming through the window though light will still be visible around the edge of the blind.

      Blackout_Lining_White.jpg Blackout_Lining_Ivory.jpg

      Thermal Lining

      The thermal lining is 50% cotton and 50% polyester which is coated on one side. This gives it insulating properties which help to reduce heat loss from a window.

      Thermal_Lining.jpg

      Bonded Interlining

      The Bonded Interlining is 100% cotton face with a polyester fleece backing. Interlining gives a fabric a more luxurious drape and is particularly beneficial for use with lighter weight fabrics. Interlining is perfect to reduce heat loss through a door or window.

      Blackout_InterLining_Ivory.jpg

      If you are unsure please contact us on 01949 845399

      Vale Roman Blind Pelmet

      Why not add a little extra something to your standard Vale Roman Blind.

      You can choose to add the 90mm deep pelmet at the top of the blind.

      roman_pelmet_(002).jpg

      If you are unsure please contact us on 01949 845399

      Blind Installation Heights

      The 2014 changes to the child safety requirements of BS EN 13120:2009+A12014 place an obligation on all blind manufacturers to sell compliant products.

      If you choose an 'Not Known Installation Height' from the drop down box your blind will be manufactured in accordance with the Safety Regulation Requirements.

      If you select an installation height (this is the height the brackets will be installed above the floor level) then your blind will be manufactured taking this into account.

      InstallationheightsBBSA1.jpg

      If you are unsure please contact us on 01949 845399

      Prices from: £310.21

      Get in Touch

      Telephone: 01949 845399

      Email: info@valeblinds.com

      Opening Hours:
      Mon-Fri 9.00am-5.00pm

      Where affordability never compromises quality

      “Where affordability never compromises quality”