VALE Blinds Electrically Operated Honeycomb Flat Roof Blind

Place your mouse over this image

On offer

10%OFF

  • 1 Year Guarantee
  • Info
  • Installation Instructions (5)

Standard Specification:

  • Hard Ware White
  • 25mm Honeycomb Fabric - Blackout or Translucent
  • Standard sprung fixing brackets
  • Supplied with 24v dc Motor, Receiver and Telis 1 Remote Control
  • A 13amp switched spur power supply is required ideally mounted approximately 100mm above the installation height of the blind.
  • Alternate Specification

    • Battery operation which includes Motor, Receiver, Telis 1 Remote Control, Rechargeable Batteries, Battery Tube, Charger and Tube Holder
    • Side cover profiles are a “L” shaped channel 40mm x 40mm
    • Easy Fit 4 sided Lantern Frame Kit
    • NOTE: To prevent the blind sagging, this blind has wire supports running through the length of the blind. These are initially inset approximately 40mm from each side followed by approximately every 500mm symmetrically

      Size Restrictions:

      Min Width - 260mm - Max Width - 2500mm

      Min Drop - 100mm - Max Drop - 3800mm

      Wire Free is available to a maximum width of 1200mm & has to be ordered with the four sided lantern frame kit ONLY

Beat a Price

VALE Blinds Electrically Operated Honeycomb Flat Roof Blind

Unix 4016

Order Code
5787
£618.00
£556.20

VALE BLINDS are now able to offer Fully Electric or Battery Powered Flat Roof Blinds

The system comprises of a choice of a 25mm honeycomb pleated blinds adding insulation. The blind can be supplied with side cover L profiles or the NEW four sided Easy Fit Lantern Frame Kit.

The blind requires a 13amp Switched supply ideally mounted approximately 100mm above the installation height of the blind. This will feed a 24v dc system, the motor is mounted within the head rail and the transformer can be mounted at your convenience, connected via a small gauge twin cable.

The mechanics are provided by Somfy using the latest RTS signalling, making use of a multi-channel remote, allowing you to operate more than one blind with the same control

  • No need for Specialist Electrical Connections
  • No cords to pull making it child safe
  • Hand Held Remote Control
  • Suitable for use with Amazon Alexa, Google Home

VALE BLINDS system is designed for square and regular shaped Dome and Tunnel windows.

The inside recess is the area from the flat of your ceiling extending upward inside the tunnel/dome until it reaches the glass of the window. This distance will vary in each individual case, the blind can be fitted squarely and horizontally within the recess either close to the glass or the ceiling opening, you decide.

Inside Recess Measuring guide

Firstly decide upon the height of your blind within the tunnel,

WIDTH: Measure the inside width of the opening on the right, middle and left, as plaster work is often not square always use the narrowest width measurement.

LENGTH: Measure the length of the window opening at the right, middle and left, as plaster work is often not square always use the narrowest length measurement.

Price in GBP
£618.00
£556.20
    Click here for help
    • *
    • *
    • Calculate
    Click for help
    Click for Help
    Click for Help
    Flat Roof Blinds 1
    Flat Roof Blinds 2
    Flat Roof Blinds 3
    Flat Roof Blinds 4

    Blackout or Translucent Fabric

    These blinds are manufactured using 25mm Honeycomb pleated fabric. The construction of this fabric makes these blinds soft, durable and highly energy efficient.

    The blind is available in Blackout Honeycomb fabric that has a foil lining to increase the energy efficiency and also Translucent Honeycomb fabric which softly diffuses incoming day light.

    The built in insulating characteristics help keep the heat out in the summer and the warmth in during the winter.

     

     

    Flat Roof Blind Side Profiles

    As standard the fabric on your blind is slightly narrower than the head rail.

    This can leave a small gap where light can leak around.

    To reduce the amount of light leakage you can choose to have the L shaped side profiles that run up the sides of the blind.

    55mm L Shaped Profiles

    If you are looking for an easier fit option, that offers better thermal insulation and protection against light leakage, then select the Easy Fit Lantern Frame.

    The Easy Fit Lantern Frame is a four sided frame that already has the blind brackets attached, to make installing the blind even easier. 

    This option is available with visible Micro Tension Wires and also without visible Micro Tension Wires. However the Wireless option is ony available up to a maximum width of 1200mm.

    MasterBlinds Lantern Frame Kit

    If you are unsure please contact us on 01949 845399

    Flat Roof Blind

     

    Model PB10 - 24V Electrical Operation - requires a 13amp switched supply. (Usually situated above the blind). The motor is mounted within the headrail and the transformer and receiver can be mounted at your convenience.

    Model PB10 - 12V Battery Operation - includes a built in motor, receiver, battery pack, rechargable batteries, battery tube, hand held remote and charger.

    Model PB10 - 12V Battery Operation with Solar Power Pack - includes a built in motor, receiver, battery pack, rechargable batteries, battery tube, hand held remote and solar panel kit.

    The dimensions of these head and bottom rails are approximately as follows:

    Moving Rail and Bottom Bar

    25mmheadrail.jpg Model_210.jpg

    Headrail (Motor End)

    MasterBlinds Electric Headrail

    Solar Panel

    MasterBlinds Solar Panel

    If you are unsure please contact us on 01949 845399

    Prices from: £618.00

    Get in Touch

    Telephone: 01949 845399

    Email: info@valeblinds.com

    Opening Hours:
    Mon-Fri 9.00am-5.00pm

    Secured by SagePay
    VISA Accepted
    Mastercard Accepted
    Maestro Accepted
    Pay by PayPal
    Where affordability never compromises quality

    “Where affordability never compromises quality”