- Downloads (1)
LuxaflexFacetteShades - Soft, stylish fabrics with unique light control
- Stainless Steel Ball Chain with 'P' clip tensioning device
- White Cassette, White Profile and White End Caps
- White Installation Brackets
- Anodised Bottom Bar with Pearl Chrone End Caps
- White or Grey Plastic Chain
- Grey (anodised) Cassette, Grey Profile and Grey End Caps
- Black Cassette, Black Profile and Black End Caps
- Black or Grey Installation Brackets
Size Limitations: (Dependant on fabric choice)
Min Width 350mm - Max Width 2450mm
Min Drop 300mm - Max Drop 2400mm
All of our products meet with the child safety requirements of EN 13120 Internal Blinds - performance requirements including safety.
As a requirement of EN13120, the maximum control length is determined by the safety device used on the product as well as the drop of the blind or installation height. The below details the maximum length of looped chain available.
Safety Device used
Not Known and drop of blind up to 2.5m
Up to 1m
Not known and drop of blind over 2.5m
Blind drop less 1.5m
Distance from floor to end of control to be at least 1.5m
Luxaflex® Facette® Shade - Important Information
Yarn accumulations (slubs) can occur at irregular intervals and represent an authenticity feature of fabrics and can, despite all precautions, not be completely avoided during the fabric manufacture process.
Facette® fabrics are highly engineered textiles, but like any fabric, there will always be some visible variations, which are normal and not product defects. Slight fraying, puckers or other variations may appear and are inherent to this product.
Because of the unique and technical structure of the fabric, the open and the closed sections are of exact equal height. In normal operation, a light gap of around 1mm between segments can remain when the fabric is in the closed position.
Depending on the height of the product, the bottom bar can be visible through the lowest open section of the shade.
When moving the shade from the closed position to the open position, the bottom bar drops an extra 15mm. For a recess fit blind an allowance of 20mm will be made on the drop to allow for this.
A small horizontal offset between the front and back layers may occur. This is not deemed as a fault.
It is possible that threads are visible on the edges of the fabric. Do not pull the threads as this will cause irreversible damage. These can be removed with scissors.
A moire pattern can occur when two transparent sections are overlaid.
If you are unsure please contact us on 01949 845399
Luxaflex Facette Shades - 14mm vanes
Sincere Boulder Grey 4707
New Luxaflex® Facette® Blinds The unique patented design features two fabric layers woven into one to create a beautiful soft fabric look for windows.
Luxaflex® Facette® Shades work like a roller blind to let you quickly and easily raise and lower the shade in both the fully open or closed position.
You can enjoy your view, effortlessly adjust the light or simply get the extra privacy you want at any time.
Luxaflex® Facette® Shades collection is designed to work perfectly with the proportions of your windows - from ultra slim 14mm vanes for an elegant look to large 46mm vanes that are a truly stylish solution. Available in stunning soft textured and coloured fabrics.
PLEASE NOTE: Due to the loose weave, threads may be noticable at the edges of the fabric
VALE BLINDS offer the complete range of Luxaflex® collections at competitive prices